Heidelberg Wallbox Energy Control Europe 11kW 5m/ 7,5m
Licensed and approved for the following European countries outside Germany: Belgium, France, Ireland, Italy, Luxembourg, Malta, Netherland, Austria, Poland, Spain, Switzerland and Hungary.
- Smart charging system for up to 16 e-cars
- Local, dynamic load management from two networked wallboxes
- A maximum of 16 wallboxes can be networked
- Modbus RTU for external load management control, e.g. B. via HEMS
- Installation of an external locking device is possible
- Connection to 230 volts (single-phase) or 400 volts (three-phase)
- Adjustable nominal current from 6 to 16 amps
- Adjustable charging power up to a maximum of 11kW
- Integrated fault current detection: DC 6mA
- Length of the cable: 5.0 m
- Plug-and-play solution: easy to install by a qualified electrician or an installation service.
- Supports all electric and hybrid vehicles that are equipped with the type 2 charging socket.
Heidelberg Wallbox Energy Control Europe 11kW 5m/ 7,5m
Licensed and approved for the following European countries outside Germany: Belgium, France, Ireland, Italy, Luxembourg, Malta, Netherland, Austria, Poland, Spain, Switzerland and Hungary.
Delivery time: 1-2 workdays*
Prices incl. VAT plus shipping costs
- Order number: 1030009055
The Heidelberg Wallbox Energy Control Europe 11 kW is the first wallbox from Heidelberg that offers local and dynamic load management. The charging current can be distributed to up to 16 wallboxes, so up to 16 hybrid or e-cars can be charged at the same time. The available electricity is automatically output to the individual wallboxes as required. This process is completely automatic. Each vehicle can be charged with up to 11 kW. As soon as a vehicle is fully charged, it will continue to be supplied with sufficient power if necessary, e.g. B. to be able to continue operating the air conditioning or auxiliary heating. When current is released, it is automatically distributed to the batteries of the other electric cars. The nominal current of the Heidelberg Wallbox Energy Control Europe can be set from 6 to 16 amps.
Of course, there is a smart interaction between your photovoltaic system and Heidelberg Energy Control Europe. You can connect the wallbox to your in-house Home Energy Management System (HEMS) and thus use your self-generated electricity, e.g. B. use the surplus electricity from the photovoltaic system to charge your electric car. The system only feeds as much solar power into the wallbox as is currently available. This enables a consumption-optimized feed-in of your self-produced electricity.
If you integrate the Heidelberg Wallbox Energy Control Europe into your HEMS, you can also control the charging system via the Internet. Depending on the manufacturer, there may be various apps available for monitoring charging processes or cost management.
In addition, it is possible to protect the wallbox from unauthorized charging using an RFID reader or a key switch. Please note that this is not included in the scope of delivery.
You can see the status of the Heidelberg Wallbox Energy Control Europe from the front lighting.
The wallbox with load management from Heidelberg is easy and convenient to use. The high-performance system guarantees fast charging of your electric vehicle. A safe and intelligent socket with an elegant design for your electric car. The already integrated fault current detection minimizes the installation costs.
The Heidelberg Wallbox Energy Control Europe is the right charging solution for garages, apartment buildings as well as company and hotel parking lots.
Enclosed you can see examples of how the Heidelberg Wallbox Energy Control Europe distributes the available electricity:
| Charging power: | adjustable up to 11 kW |
| Front lighting: | Display of the operating status |
| Charging cable: | 5 m, 7,5 m |
| Packaging: | disposable cardboard box incl. operating and installation instructions and safety instructions |
| Protection class: | IP54, splash-proof |
| Height: | 386 mm |
| Width: | 295 mm |
| Depth: | 117 mm |
| Operating temperature: | -25°C bis + 40°C |
| Connection Supply cable: | 2.5 mm² to 6.0 mm², spring clamp technology |
| Charging standard: | DIN EN 61851-1 |
| Vehicle charging connector: | Type 2 |
| Fault current detection: | AC 30mA, DC 6mA (integrated) |
| Nominal frequency: | 50 Hz |
| Rated current: | adjustable from 6 to 16 amps |
| Nominal voltage: | 230/400 V |
- Intuitively operated charging station for e-vehicles
- Smart charging system for up to 16 e-cars - a maximum of 16 wallboxes can be networked
- Local, dynamic load management from two networked wallboxes
- Charging solution for garages, apartment buildings as well as company and hotel parking lots
- Installation of an external locking device is possible
- Safe indoors and outdoors even in adverse weather conditions
- Intelligent charging technology MADE IN GERMANY. No follow-up costs due to freedom from maintenance
- Easy assembly by a qualified electrician or installation service
- Charging power adjustable up to 11 kW
- Reduced installation costs thanks to integrated fault current detection
- Intuitive, inexpensive plug-and-play solution
- Energy-saving stand-by mode in idle mode
- Suitable for all electric and hybrid vehicles that are equipped with a type 2 charging socket in accordance with IEC 62196-2
- Scope of delivery HEIDELBERG Wallbox Energy Control Europe: Wallbox incl. charging cable with type 2 charging plug in accordance with DIN EN 62196-2, operating and assembly instructions + safety instructions
Caution:
- Installation of the charging station is only permitted in accordance with the installation instructions and by a qualified electrician
- Charging station can only be operated stationary (wall mounting including electrical connection)
- Improper opening and repair of the charging station is not permitted!
