Heidelberg Wallbox Energy Control 11kW 5m/7,5m – KFW eligible

Licensed and approved for Germany only.

  • Smart charging system for up to 16 e-cars
  • Local, dynamic load management from two networked wallboxes
  • A maximum of 16 wallboxes can be networked
  • Modbus RTU for external load management control, e.g. B. via HEMS
  • Installation of an external locking device is possible
  • Connection to 230 volts (single-phase) or 400 volts (three-phase)
  • Adjustable nominal current from 6 to 16 amps
  • Adjustable charging power up to a maximum of 11kW
  • Integrated fault current detection: DC 6mA
  • Length of the cable: 5.0 m
  • Plug-and-play solution: easy to install by a qualified electrician or an installation service.
  • Supports all electric and hybrid vehicles that are equipped with the type 2 charging socket.

Heidelberg Wallbox Energy Control 11kW 5m/7,5m – KFW eligible

Licensed and approved for Germany only.

€901.00
( €776.72 net price )

Delivery time 80-120 Workdays

We will be happy to make you an offer. (E-Mail: info@heidelberg-wallbox.eu)
You've seen this article cheaper? Please contact us so that we can make you a counter offer.

Prices incl. VAT plus shipping costs

Cable Lenght Energy Control:

  • 1020001283
Heidelberg Wallbox Energy Control 11kW 5m/7,5m – KFW eligible


You can have the Heidelberg Wallbox Energy Control 11kW funded by the KFW. The following criteria must be met for funding for private charging points:

  • A subsidy of € 900.00 is permitted for each charging point if the total costs (item price + installation costs) are over € 900.00. Means that this article is eligible for funding by KFW without incurring installation costs.
  • The wallbox must not have more than 11kW charging power and must have an intelligent control system.
  • The prerequisite for funding is that only electricity from renewable energies may be used for the charging station. This means e.g. B. from your own photovoltaic system or via a special tariff from your energy supplier.

With the Heidelberg Wallbox Energy Control, Heidelberger Druckmaschinen AG has produced a wallbox that offers local and dynamic load management. Up to 16 wallboxes can be networked with one another, which means that the charging current can be intelligently distributed to these wallboxes. 16 electric and / or hybrid cars can be charged at the same time. The available electricity is automatically distributed to the individual wallboxes as required. This process is completely automatic. Each vehicle can be charged with up to 11kW. When an e-car or hybrid is fully charged, it can continue to be supplied with sufficient power if necessary, e.g. B. to be able to continue operating the auxiliary heating or air conditioning. As soon as current that is no longer required is released, it is automatically used for charging the other vehicles and distributed elsewhere. The nominal current of the Heidelberg Wallbox Energy Control can be set from 6 to 16 amps.

Interaction with your photovoltaic system and the Heidelberg Wallbox Energy Control is possible. The wallbox can be connected to your Home Energy Management System (HEMS). This means that you can use the excess electricity you have produced yourself to charge your e-car. The HEMS only feeds the electricity that is currently available into the wallbox.

The connection between the wallbox and your HEMS enables control via the Internet. Various apps are available for monitoring charging processes or cost management.

The front lighting shows which charging mode the Heidelberg Wallbox Energy Control is in.

You can protect the wallbox against unauthorized charging by installing an RFID reader or a key switch. Please note that these locking devices are not included in the scope of delivery.

A very easy and comfortable handling is given. You can also quickly charge your electric vehicle with up to 11kW. The integrated fault current detection minimizes electricity costs.

According to the manufacturer, this wallbox is not suitable for sales and commissioning outside of Germany. In the event of damage, there may be complications with the claims handling of your insurance.

The Heidelberg Wallbox Energy Control is the right charging solution for garages, apartment buildings and company and hotel parking lots.

Enclosed you can see examples of how the Heidelberg Wallbox Energy Control distributes the available electricity:

local load management

rotating switch positions

Charging power: adjustable up to 11 kW
Frontbeleuchtung: Anzeige des Betriebszustandes
Charging cable: 5 m, 7,5 m
Packaging: disposable cardboard box incl. operating and installation instructions and safety instructions
Protection class: IP54, splash-proof
Height: 386 mm
Width: 295 mm
Depth: 117 mm
Operating temperature: -25°C bis + 40°C
Connection Supply cable: 2.5 mm² to 6.0 mm², spring clamp technology
Charging standard: DIN EN 61851-1
Vehicle charging connector: Type 2
Fault current detection: AC 30mA, DC 6mA (integriert)
Nominal frequency: 50 Hz
Rated current: Einstellbar von 6 bis 16 Ampere
Nominal voltage: 230/400 V
  • Intuitively operated charging station for e-vehicles
  • Smart charging system for up to 16 e-cars - a maximum of 16 wallboxes can be networked
  • Local, dynamic load management from two networked wallboxes
  • Charging solution for garages, apartment buildings as well as company and hotel parking lots
  • Installation of an external locking device is possible
  • Safe indoors and outdoors even in adverse weather conditions
  • Intelligent charging technology MADE IN GERMANY. No follow-up costs due to freedom from maintenance
  • Easy assembly by a qualified electrician or installation service
  • Charging power adjustable up to 11 kW
  • Reduced installation costs thanks to integrated fault current detection
  • Intuitive, inexpensive plug-and-play solution
  • Energy-saving stand-by mode in idle mode
  • Suitable for all electric and hybrid vehicles that are equipped with a type 2 charging socket in accordance with IEC 62196-2
  • Scope of delivery HEIDELBERG Wallbox Energy Control: Wallbox incl. charging cable with type 2 charging plug in accordance with DIN EN 62196-2, operating and assembly instructions + safety instructions

 

Caution:

  • Installation of the charging station is only permitted in accordance with the installation instructions and by a qualified electrician
  • Use of the charging station is only permitted in Germany
  • Charging station can only be operated stationary (wall mounting including electrical connection)
  • Improper opening and repair of the charging station is not permitted!
  • Please note that this wallbox is only approved and licensed for Germany, if you install this wallbox outside of Germany, the warranty and liability are void!
Similar products
Heidelberg Wallbox Home Eco Europe 11kW 5m

Licensed and approved for all European countries outside Germany (except Norway).

Heidelberg Wallbox Home Eco Europe 11kW 5m
  • Connection to 230 volts (single-phase) or 400 volts (three-phase)
  • Type 2 socket
  • Plug-and-play solution: easy installation by electrician or installation service
  • Integrated residual current detection: DC 6mA
  • Charging capacity (adjustable): e.g. 2.1 kW/3.7 kW/7.2 kW/11 kW
  • Cable length: 5 m
  • supports all electric and hybrid vehicles equipped with the type 2 charging socket
  • Use of the charging station in all European countries (except Norway).
€595.00
€512.93 excl. MwSt
Heidelberg Wallbox Home Eco 11kW 3,5m/ 5m/ 7,5m

Licensed and approved for Germany only.

Heidelberg Wallbox Home Eco 11kW 3,5m/ 5m/ 7,5m
  • Connection to 230 volts (single-phase) or 400 volts (three-phase)
  • Integrated residual current detection: DC 6mA
  • Cable length: 3.5m
  • Charging capacity (adjustable): e.g.  2.1 kW/3.7kW/7.2 kW/11kW
  • Plug-and-play solution: easy installation by electrician or installation service
  • supports all electric and hybrid vehicles equipped with the type 2 charging socket
€435.00
€375.00 excl. MwSt
Heidelberg Wallbox stainless steel column

Heidelberg Wallbox stainless steel column
  • Material: V2A stainless steel
  • Dimensions:: 1370 (h) x 250 (w) x 180 (d) in millimeters
  • Weight: 11.5 kg
  • Color: Matt stainless steel
  • Universal column – compatible with all Heidelberg Wallboxes
  • Easy and safe installation
€399.92
€344.76 excl. MwSt
Data protection
We use cookies on our website. Some are necessary, others help us with marketing, analysis and improving your experience with us.
Necessary cookies
These cookies are necessary to use our website. Details
Provider: EN (Privacy policy)
Functional cookies
These cookies provide additional functions such as the wish list or the choice of currency for you. Details
Provider: EN (Privacy policy)
Marketing
These cookies / services are used to operate personalized advertising.
Facebook Pixel
The Facebook Pixel is an analysis tool that we use to measure the effectiveness of our advertising on Facebook. This allows us to analyze actions that you perform on our website. Details
Provider: Facebook Inc. (USA) (Privacy policy)
Google Tag Manager
With the Google Tag Manager, we analyze how you interact with our website to find out what is good and what does not. Details
Provider: Google LLC (USA) or Google Ireland Limited (Ireland, EU) (Privacy policy)