Heidelberg Wallbox Home Eco 11kW 3,5m/ 5m/ 7,5m

Licensed and approved for Germany only.

  • Connection to 230 volts (single-phase) or 400 volts (three-phase)
  • Integrated residual current detection: DC 6mA
  • Cable length: 3.5m
  • Charging capacity (adjustable): e.g.  2.1 kW/3.7kW/7.2 kW/11kW
  • Plug-and-play solution: easy installation by electrician or installation service
  • supports all electric and hybrid vehicles equipped with the type 2 charging socket

Cable lenght:

Wallbox Type:

More Options

Heidelberg Wallbox Home Eco 11kW 3,5m/ 5m/ 7,5m

Licensed and approved for Germany only.

Selling price €499.00
€445.00
( €373.95 net price )

Delivery time: 1-2 workdays*

Prices incl. VAT plus shipping costs

We will be happy to make you an offer. (E-Mail: info@heidelberg-wallbox.eu)
You've seen this article cheaper? Please contact us so that we can make you a counter offer.
  • 1020001155
Heidelberg Wallbox Home Eco 11kW 3,5m/ 5m/ 7,5m

The Wallbox impresses with its easy and comfortable handling. The high performance charging system guarantees a fast charging of your electric vehicle.
A safe and intelligent socket with an elegant design for your electric car.
No fear of expensive installation costs! The integrated residual current detection reduces the risk to a minimum.
Type 2 electric and hybrid vehicles equipped according to IEC 62196-2 are suitable for the wallbox.
All electric cars can be charged.

According to the manufacturer, this wallbox is not suitable for distribution and commissioning outside Germany.
In the event of damage, complications may arise with the claims processing/your insurance.
Therefore, please choose the EU version of the wallbox for a desired location outside of Germany.

Caution: If you remove the Heidelberg wallbox in single-phase, the wallbox can charge your electric / hybrid vehicle with up to 3.68 kW. With a two-phase connection, charging with up to 7.36 kW is possible, and with a three-phase connection, a global charging power of up to 11.04 kW is possible. You can differentiate between the charging power for all three types of installation using the rotary switch; these can be seen on the circuit board of the wallbox.

Please note that this Wallbox is only approved and licensed for Germany, if you install this Wallbox outside of Germany, the warranty and liability are void!

Information about the rotary switch positions:

rotating switch positions

Charging power: adjustable up to 11 kW
LED button: Display of operating status and system reset
Charging cable: 3,5 m, 5 m, 7,5 m
Packaging: disposable cardboard box incl. operating and installation instructions and safety instructions
Standards: CE
Protection class: IP54, splash-proof
Height: 386 mm
Width: 295 mm
Depth: 117 mm
Operating temperature: -25°C bis + 40°C
Connection Supply cable: 2.5 mm² to 6.0 mm², spring clamp technology
Charging standard: DIN EN 61851-1
Vehicle charging connector: Type 2
Fault current detection: AC 30mA, DC 6mA (integrated)
Nominal frequency: 50 Hz
Rated current: 16 A
Nominal voltage: 230/400 V
  • Intuitively operated charging station for e-vehicles
  • Applicable in garages and carports
  • Safe indoors and outdoors even in adverse weather conditions
  • Intelligent charging technology MADE IN GERMANY. No follow-up costs due to maintenance-free operation
  • Simple assembly by qualified electricians or installation service
  • charging power adjustable up to 11 kw
  • Reduced installation costs thanks to integrated residual current detection
  • Intuitively operated, cost-effective plug-and-play solution
  • Power-saving stand-by mode in idle mode
  • Suitable for all electric and hybrid vehicles equipped with a type 2 charging socket according to IEC 62196-2
  • Scope of delivery HEIDELBERG Wallbox Home Eco: Wallbox, 3.5 m charging cable with type 2 charging plug according to DIN EN 62196-2, operating and assembly instructions + safety instructions


Disclaimer

  • The charging station may only be installed in accordance with the installation instructions and by a qualified electrician
  • Use of the charging station only permitted in Germany
  • Charging station only for stationary use (wall mounting incl. fixed electrical connection)
  • Improper opening and repairing of the charging station is not permitted!
  • Please note that this Wallbox is only approved and licensed for Germany, if you install this Wallbox outside of Germany, the warranty and liability are void!
Similar products
Heidelberg Wallbox Home Eco 11kW 3,5m/ 5m/ 7,5m

Licensed and approved for Germany only.

Heidelberg Wallbox Home Eco 11kW 3,5m/ 5m/ 7,5m

  • Connection to 230 volts (single-phase) or 400 volts (three-phase)
  • Integrated residual current detection: DC 6mA
  • Cable length: 3.5m
  • Charging capacity (adjustable): e.g.  2.1 kW/3.7kW/7.2 kW/11kW
  • Plug-and-play solution: easy installation by electrician or installation service
  • supports all electric and hybrid vehicles equipped with the type 2 charging socket
€445.00
€373.95 excl. MwSt

Prices incl. VAT plus shipping costs

Heidelberg Wallbox stainless steel column

Heidelberg Wallbox stainless steel column

  • Material: V2A stainless steel
  • Dimensions:: 1370 (h) x 250 (w) x 180 (d) in millimeters
  • Weight: 11.5 kg
  • Color: Matt stainless steel
  • Universal column – compatible with all Heidelberg Wallboxes
  • Easy and safe installation
€399.92
€336.07 excl. MwSt

Prices incl. VAT plus shipping costs