Heidelberg Wallbox Home Eco 11kW 3,5m/ 5m/ 7,5m
Licensed and approved for tEuropean countries.
- Connection to 230 volts (single-phase) or 400 volts (three-phase)
- Integrated residual current detection: DC 6mA
- Cable length: 3.5m
- Charging capacity (adjustable): e.g. 2.1 kW/3.7kW/7.2 kW/11kW
- Plug-and-play solution: easy installation by electrician or installation service
- supports all electric and hybrid vehicles equipped with the type 2 charging socket
Heidelberg Wallbox Home Eco 11kW 3,5m/ 5m/ 7,5m
Licensed and approved for tEuropean countries.
Delivery time: 1-2 workdays*
Prices incl. VAT plus shipping costs
- Order number: 1020001155
The Wallbox impresses with its easy and comfortable handling. The high performance charging system guarantees a fast charging of your electric vehicle.
A safe and intelligent socket with an elegant design for your electric car.
No fear of expensive installation costs! The integrated residual current detection reduces the risk to a minimum.
Type 2 electric and hybrid vehicles equipped according to IEC 62196-2 are suitable for the wallbox.
All electric cars can be charged.
Caution: If you remove the Heidelberg wallbox in single-phase, the wallbox can charge your electric / hybrid vehicle with up to 3.68 kW. With a two-phase connection, charging with up to 7.36 kW is possible, and with a three-phase connection, a global charging power of up to 11.04 kW is possible. You can differentiate between the charging power for all three types of installation using the rotary switch; these can be seen on the circuit board of the wallbox.
Information about the rotary switch positions:
| Charging power: | adjustable up to 11 kW |
| LED button: | Display of operating status and system reset |
| Charging cable: | 3,5 m, 5 m, 7,5 m |
| Packaging: | disposable cardboard box incl. operating and installation instructions and safety instructions |
| Standards: | CE |
| Protection class: | IP54, splash-proof |
| Height: | 386 mm |
| Width: | 295 mm |
| Depth: | 117 mm |
| Operating temperature: | -25°C bis + 40°C |
| Connection Supply cable: | 2.5 mm² to 6.0 mm², spring clamp technology |
| Charging standard: | DIN EN 61851-1 |
| Vehicle charging connector: | Type 2 |
| Fault current detection: | AC 30mA, DC 6mA (integrated) |
| Nominal frequency: | 50 Hz |
| Rated current: | 16 A |
| Nominal voltage: | 230/400 V |
- Intuitively operated charging station for e-vehicles
- Applicable in garages and carports
- Safe indoors and outdoors even in adverse weather conditions
- Intelligent charging technology MADE IN GERMANY. No follow-up costs due to maintenance-free operation
- Simple assembly by qualified electricians or installation service
- charging power adjustable up to 11 kw
- Reduced installation costs thanks to integrated residual current detection
- Intuitively operated, cost-effective plug-and-play solution
- Power-saving stand-by mode in idle mode
- Suitable for all electric and hybrid vehicles equipped with a type 2 charging socket according to IEC 62196-2
- Scope of delivery HEIDELBERG Wallbox Home Eco: Wallbox, 3.5 m charging cable with type 2 charging plug according to DIN EN 62196-2, operating and assembly instructions + safety instructions
Disclaimer
- The charging station may only be installed in accordance with the installation instructions and by a qualified electrician
- Charging station only for stationary use (wall mounting incl. fixed electrical connection)
- Improper opening and repairing of the charging station is not permitted!
