Heidelberg Wallbox Energy Control 11kW 5m/ 7,5m

Licensed and approved for tEuropean countries.

  • Connection to 230 volts (single-phase) or 400 volts (three-phase)
  • Integrated residual current detection: DC 6mA
  • Cable length: 3.5m
  • Charging capacity (adjustable): e.g.  2.1 kW/3.7kW/7.2 kW/11kW
  • Plug-and-play solution: easy installation by electrician or installation service
  • supports all electric and hybrid vehicles equipped with the type 2 charging socket

Cable Lenght Energy Control:

Wallbox Type:

More Options

Heidelberg Wallbox Energy Control 11kW 5m/ 7,5m

Licensed and approved for tEuropean countries.

€795.96
( €668.87 net price )

Delivery time: 1-2 workdays*

Prices incl. VAT plus shipping costs

We will be happy to make you an offer. (E-Mail: info@heidelberg-wallbox.eu)
You've seen this article cheaper? Please contact us so that we can make you a counter offer.
  • 1030006759
Heidelberg Wallbox Energy Control 11kW 5m/ 7,5m

The Heidelberg Wallbox Energy Control 11 kW is the first wallbox from Heidelberg that offers local and dynamic load management. The charging current can be distributed to up to 16 wallboxes, so up to 16 hybrid or e-cars can be charged at the same time. The available electricity is automatically output to the individual wallboxes as required. This process is completely automatic. Each vehicle can be charged with up to 11 kW. As soon as a vehicle is fully charged, it will continue to be supplied with sufficient power if necessary, e.g. B. to be able to continue operating the air conditioning or auxiliary heating. When current is released, it is automatically distributed to the batteries of the other electric cars. The nominal current of the Heidelberg Wallbox Energy Control can be set from 6 to 16 amps.

Of course, there is a smart interaction between your photovoltaic system and Heidelberg Energy Control. You can connect the wallbox to your in-house Home Energy Management System (HEMS) and thus use your self-generated electricity, e.g. B. use the surplus electricity from the photovoltaic system to charge your electric car. The system only feeds as much solar power into the wallbox as is currently available. This enables a consumption-optimized feed-in of your self-produced electricity.

If you integrate the Heidelberg Wallbox Energy Control into your HEMS, you can also control the charging system via the Internet. Depending on the manufacturer, there may be various apps available for monitoring charging processes or cost management.

In addition, it is possible to protect the wallbox from unauthorized charging using an RFID reader or a key switch. Please note that this is not included in the scope of delivery.

You can see the status of the Heidelberg Wallbox Energy Control from the front lighting.

The wallbox with load management from Heidelberg is easy and convenient to use. The high-performance system guarantees fast charging of your electric vehicle. A safe and intelligent socket with an elegant design for your electric car. The already integrated fault current detection minimizes the installation costs.

The Heidelberg Wallbox Energy Control is the right charging solution for garages, apartment buildings as well as company and hotel parking lots.

Enclosed you can see examples of how the Heidelberg Wallbox Energy Control distributes the available electricity:

local load management

rotating switch positions

Charging power: adjustable up to 11 kW
Front lighting: Display of the operating status
Charging cable: 5 m, 7,5 m
Packaging: disposable cardboard box incl. operating and installation instructions and safety instructions
Protection class: IP54, splash-proof
Height: 386 mm
Width: 295 mm
Depth: 117 mm
Operating temperature: -25°C bis + 40°C
Connection Supply cable: 2.5 mm² to 6.0 mm², spring clamp technology
Charging standard: DIN EN 61851-1
Vehicle charging connector: Type 2
Fault current detection: AC 30mA, DC 6mA (integrated)
Nominal frequency: 50 Hz
Rated current: adjustable from 6 to 16 amps
Nominal voltage: 230/400 V
  • Intuitively operated charging station for e-vehicles
  • Applicable in garages and carports
  • Safe indoors and outdoors even in adverse weather conditions
  • Intelligent charging technology MADE IN GERMANY. No follow-up costs due to maintenance-free operation
  • Simple assembly by qualified electricians or installation service
  • charging power adjustable up to 11 kw
  • Reduced installation costs thanks to integrated residual current detection
  • Intuitively operated, cost-effective plug-and-play solution
  • Power-saving stand-by mode in idle mode
  • Suitable for all electric and hybrid vehicles equipped with a type 2 charging socket according to IEC 62196-2
  • Scope of delivery HEIDELBERG Wallbox Home Eco: Wallbox, 3.5 m charging cable with type 2 charging plug according to DIN EN 62196-2, operating and assembly instructions + safety instructions


Disclaimer

  • The charging station may only be installed in accordance with the installation instructions and by a qualified electrician
  • Use of the charging station only permitted in Germany
  • Charging station only for stationary use (wall mounting incl. fixed electrical connection)
  • Improper opening and repairing of the charging station is not permitted!
  • Please note that this Wallbox is only approved and licensed for Germany, if you install this Wallbox outside of Germany, the warranty and liability are void!
Similar products
Heidelberg Wallbox Home Eco 11kW 3,5m/ 5m/ 7,5m

Licensed and approved for tEuropean countries.

Heidelberg Wallbox Home Eco 11kW 3,5m/ 5m/ 7,5m

  • Connection to 230 volts (single-phase) or 400 volts (three-phase)
  • Integrated residual current detection: DC 6mA
  • Cable length: 3.5m
  • Charging capacity (adjustable): e.g.  2.1 kW/3.7kW/7.2 kW/11kW
  • Plug-and-play solution: easy installation by electrician or installation service
  • supports all electric and hybrid vehicles equipped with the type 2 charging socket
€445.00
€373.95 excl. MwSt

Prices incl. VAT plus shipping costs

Heidelberg Wallbox stainless steel column

Heidelberg Wallbox stainless steel column

  • Material: V2A stainless steel
  • Dimensions:: 1370 (h) x 250 (w) x 180 (d) in millimeters
  • Weight: 11.5 kg
  • Color: Matt stainless steel
  • Universal column – compatible with all Heidelberg Wallboxes
  • Easy and safe installation
€399.92
€336.07 excl. MwSt

Prices incl. VAT plus shipping costs