Official Heidelberg Wallbox Online Shop

Heidelberg Wallbox Home Eco 11 kW plus steel column

Licensed and approved for Germany only.

  • Connection to 230 volts (single-phase) or 400 volts (three-phase)
  • Integrated residual current detection: DC 6mA
  • Cable length: 3.5m
  • Charging capacity (adjustable): e.g.  2.1 kW/3.7kW/7.2 kW/11kW
  • Plug-and-play solution: easy installation by electrician or installation service
  • supports all electric and hybrid vehicles equipped with the type 2 charging socket

Heidelberg Wallbox Home Eco 11 kW plus steel column

Licensed and approved for Germany only.

Selling price €896.11
€819.95
( €706.85 net price )

Delivery time 5-15 Workdays

We will be happy to make you an offer. (E-Mail: info@heidelberg-wallbox.eu)
You've seen this article cheaper? Please contact us so that we can make you a counter offer.

Prices incl. VAT plus shipping costs

Cable lenght:

  • 1020001278
Heidelberg Wallbox Home Eco 11 kW plus steel column

The Wallbox impresses with its easy and comfortable handling. The high performance charging system guarantees a fast charging of your electric vehicle.
A safe and intelligent socket with an elegant design for your electric car.
No fear of expensive installation costs! The integrated residual current detection reduces the risk to a minimum.
Type 2 electric and hybrid vehicles equipped according to IEC 62196-2 are suitable for the wallbox.
All electric cars can be charged.

According to the manufacturer, this wallbox is not suitable for distribution and commissioning outside Germany.
In the event of damage, complications may arise with the claims processing/your insurance.
Therefore, please choose the EU version of the wallbox for a desired location outside of Germany.

Caution: If the Wallbox is connected to 230V, only the setting with 2.1 kW is possible. The 230V (voltage of normal sockets) physically brings a maximum of 2.7 kW. In order to be able to use the full 11 kW (or> 2.1 kW) of the Heidelberg Wallbox settings, these must be connected to high-voltage current with 400V.

If there is no possibility for wall mounting, the wallbox column made of ground, matt stainless steel offers an alternative. It impresses with its simple installation and is suitable for both indoor and outdoor use.

Please note that this Wallbox is only approved and licensed for Germany, if you install this Wallbox outside of Germany, the warranty and liability are void!

The universal column is compatible with all Heidelberg wallboxes. The delivery does not include the base plate and screws for anchoring the stele to the floor.

Charging power: adjustable up to 11 kW
LED button: Display of operating status and system reset
Charging cable: 3,5 m, 5 m, 7,5 m
Packaging: disposable cardboard box incl. operating and installation instructions and safety instructions
Standards: CE
Protection class: IP54, splash-proof
Height of the Wallbox: 386 mm
Width of the Wallbox: 295 mm
Depth of the Wallbox: 117 mm
Operating temperature: -25°C bis + 40°C
Connection Supply cable: 2.5 mm² to 6.0 mm², spring clamp technology
Charging standard: DIN EN 61851-1
Vehicle charging connector: Type 2
Fault current detection: AC 30mA, DC 6mA (integriert)
Nominal frequency: 50 Hz
Rated current: 16 A
Nominal voltage: 230/400 V
Material of the column: Stainless steel V2A
Depth of the column: 180 mm
Width of the column: 250 mm
Height of the column: 1370 mm
Weight of the column: 11,5 kg
  • Intuitively operated charging station for e-vehicles
  • Applicable in garages and carports
  • Safe indoors and outdoors even in adverse weather conditions
  • Intelligent charging technology MADE IN GERMANY. No follow-up costs due to maintenance-free operation
  • Simple assembly by qualified electricians or installation service
  • charging power adjustable up to 11 kw
  • Reduced installation costs thanks to integrated residual current detection
  • Intuitively operated, cost-effective plug-and-play solution
  • Power-saving stand-by mode in idle mode
  • Suitable for all electric and hybrid vehicles equipped with a type 2 charging socket according to IEC 62196-2
  • Scope of delivery HEIDELBERG Wallbox Home Eco: Wallbox, 3.5 m charging cable with type 2 charging plug according to DIN EN 62196-2, operating and assembly instructions + safety instructions


Disclaimer

  • The charging station may only be installed in accordance with the installation instructions and by a qualified electrician
  • Use of the charging station only permitted in Germany
  • Charging station only for stationary use (wall mounting incl. fixed electrical connection)
  • Improper opening and repairing of the charging station is not permitted!
Recommended Products
Heidelberg Wallbox Home Eco 11 kW

Licensed and approved for Germany only.

Heidelberg Wallbox Home Eco 11 kW
  • Connection to 230 volts (single-phase) or 400 volts (three-phase)
  • Integrated residual current detection: DC 6mA
  • Cable length: 3.5m
  • Charging capacity (adjustable): e.g.  2.1 kW/3.7kW/7.2 kW/11kW
  • Plug-and-play solution: easy installation by electrician or installation service
  • supports all electric and hybrid vehicles equipped with the type 2 charging socket
€435.00
€375.00 excl. MwSt
Heidelberg Wallbox stainless steel column

Heidelberg Wallbox stainless steel column
  • Material: V2A stainless steel
  • Dimensions:: 1370 (h) x 250 (w) x 180 (d) in millimeters
  • Weight: 11.5 kg
  • Color: Matt stainless steel
  • Universal column – compatible with all Heidelberg Wallboxes
  • Easy and safe installation
€399.94
€344.78 excl. MwSt