Products from Heidelberg
No results were found for the filter!
Heidelberg charging cable mode 3 Typ 2 5 Meter ![Heidelberg charging cable mode 3 Typ 2 5 Meter]( "Heidelberg charging cable mode 3 Typ 2 5 Meter")
- Charge safely on the go
- Charging power: 11 kW
- Type 2 connector
- 5 meter charging cable
- Mode 3 charging cable
- Use at public charging stations or stations
The Heidelberg Mode 3 charging cable with type 2 plug has a charging cable length of 5 meters and can be used to charge your hybrid or electric vehicle at public charging stations or stations. The maximum charging power is 11 kW. The...
€199.00
€167.23 excl. MwSt Prices incl. VAT plus shipping costs
Heidelberg Wallbox replacement protective cap ![Heidelberg Wallbox replacement protective cap]( "Heidelberg Wallbox replacement protective cap")
- Replacement protective cap for your Heidelberg Wallbox
- Protective cap for type 2 charging cable
- easy construction
- Compatible with all Heidelberg wallboxes
The replacement protective cap can easily be exchanged on your Heidelberg Wallbox. The protective cap is easy to assemble and protects the type 2 connector from the elements.
€17.50
€14.71 excl. MwSt Prices incl. VAT plus shipping costs
Heidelberg Wallbox replacement charging cable Typ 2 5m/7m ![Heidelberg Wallbox replacement charging cable Typ 2 5m/7m]( "Heidelberg Wallbox replacement charging cable Typ 2 5m/7m")
- Replacement as a charging cable for your Heidelberg Wallbox
- Includes protective cap for protection against the elements
- Length of the cable: 5m
- Charging power: 11 kW
- Installation may only be carried out by a qualified electrician
- Compatible with all Heidelberg wallboxes
If your charging cable breaks after a few years of use or through your own fault, our replacement cable comes into play. Should the case arise, you can safely purchase this cable and have it installed by a qualified electrician. The...
€149.00
€125.21 excl. MwSt Prices incl. VAT plus shipping costs
Heidelberg Wallbox Energy Control Europe 11kW 5m/ 7,5m ![Heidelberg Wallbox Energy Control Europe 11kW 5m/ 7,5m]( "Heidelberg Wallbox Energy Control Europe 11kW 5m/ 7,5m")
Licensed and approved for the following European countries outside Germany: Belgium, France, Ireland, Italy, Luxembourg, Malta, Netherland, Austria, Poland, Spain, Switzerland and Hungary.
- Smart charging system for up to 16 e-cars
- Local, dynamic load management from two networked wallboxes
- A maximum of 16 wallboxes can be networked
- Modbus RTU for external load management control, e.g. B. via HEMS
- Installation of an external locking device is possible
- Connection to 230 volts (single-phase) or 400 volts (three-phase)
- Adjustable nominal current from 6 to 16 amps
- Adjustable charging power up to a maximum of 11kW
- Integrated fault current detection: DC 6mA
- Length of the cable: 5.0 m
- Plug-and-play solution: easy to install by a qualified electrician or an installation service.
- Supports all electric and hybrid vehicles that are equipped with the type 2 charging socket.
The Heidelberg Wallbox Energy Control Europe 11 kW is the first wallbox from Heidelberg that offers local and dynamic load management. The charging current can be distributed to up to 16 wallboxes, so up to 16 hybrid or e-cars can be...
€815.00
€684.87 excl. MwSt Prices incl. VAT plus shipping costs
Heidelberg Wallbox stainless steel column duo ![Heidelberg Wallbox stainless steel column duo]( "Heidelberg Wallbox stainless steel column duo")
- Material: V2A stainless steel
- High: 1370 millimeters
- Weight: 14.4 kg
- Color: Matt stainless steel
- Universal column – compatible with all Heidelberg Wallboxes
- Easy and safe installation
It is not always possible to mount the wallbox on the wall. Open-space parking spaces or parking spaces in underground garages, for example, often do not allow wall mounting. And especially if you actually want to attach two wallboxes,...
€638.99
€536.97 excl. MwSt Prices incl. VAT plus shipping costs
Heidelberg Combox Lite ![Heidelberg Combox Lite]( "Heidelberg Combox Lite")
Licensed and approved for Germany only.
- Single-phase connection 230V
- Intuitive and simple monitoring and analysis of the Heidelberg Wallbox Energy Control
- Current charging status and diagnostic data are displayed
- User friendly software
- Software updates of the charging infrastructure are easy to carry out
- Charging infrastructure can be controlled intelligently
- Connection to the backend possible (OCPP 1.6)
The wishes of customers to be able to charge several e-cars at the same time were heard by the manufacturers. For example at Heidelberger Druckmaschinen AG. With its Heidelberg Combox Lite, it launched a system on the market in 2021 that...
€696.00
€584.87 excl. MwSt Prices incl. VAT plus shipping costs
Heidelberg Combox ![Heidelberg Combox]( "Heidelberg Combox")
Licensed and approved for Germany only.
- Single-phase connection 230V
- Intuitive and simple monitoring and analysis of the Heidelberg Wallbox Energy Control
- Current charging status and diagnostic data are displayed
- User friendly software
- Software updates of the charging infrastructure are easy to carry out
- Charging infrastructure can be controlled intelligently
- Connection to the backend possible (OCPP 1.6)
The number of registrations for e-cars is increasing rapidly and with them the demand for options to be able to charge several vehicles at the same time at the same time. Heidelberger Druckmaschinen AG follows precisely this need with...
€949.99
€798.31 excl. MwSt Prices incl. VAT plus shipping costs
Heidelberg Wallbox Energy Control 11kW 5m/7,5m Plus Steel Column ![Heidelberg Wallbox Energy Control 11kW 5m/7,5m Plus Steel Column]( "Heidelberg Wallbox Energy Control 11kW 5m/7,5m Plus Steel Column")
Licensed and approved for Germany only.
- Smart charging system for up to 16 e-cars
- Local, dynamic load management from two networked wallboxes
- A maximum of 16 wallboxes can be networked
- Modbus RTU for external load management control, e.g. B. via HEMS
- Installation of an external locking device is possible
- Connection to 230 volts (single-phase) or 400 volts (three-phase)
- Adjustable nominal current from 6 to 16 amps
- Adjustable charging power up to a maximum of 11kW
- Integrated fault current detection: DC 6mA
- Length of the cable: 5.0 m
- Plug-and-play solution: easy to install by a qualified electrician or an installation service.
- Supports all electric and hybrid vehicles that are equipped with the type 2 charging socket.
- Material of the column: V2A stainless steel
- Dimensions of the column: 1370 (h) x 250 (w) x 180 (d) in millimeters
- Weight of the column: 11.5 kg
- Color of the column: Matt stainless steel
- Universal column – compatible with all Heidelberg Wallboxes
- Easy and safe installation
The Heidelberg Wallbox Energy Control 11 kW is the first wallbox from Heidelberg that offers local and dynamic load management. The charging current can be distributed to up to 16 wallboxes, so up to 16 hybrid or e-cars can be charged at...
€1,173.92
€986.49 excl. MwSt Prices incl. VAT plus shipping costs
Heidelberg Wallbox Energy Control 11kW 5m/7,5m – KFW eligible ![Heidelberg Wallbox Energy Control 11kW 5m/7,5m – KFW eligible]( "Heidelberg Wallbox Energy Control 11kW 5m/7,5m – KFW eligible")
Licensed and approved for Germany only.
- Smart charging system for up to 16 e-cars
- Local, dynamic load management from two networked wallboxes
- A maximum of 16 wallboxes can be networked
- Modbus RTU for external load management control, e.g. B. via HEMS
- Installation of an external locking device is possible
- Connection to 230 volts (single-phase) or 400 volts (three-phase)
- Adjustable nominal current from 6 to 16 amps
- Adjustable charging power up to a maximum of 11kW
- Integrated fault current detection: DC 6mA
- Length of the cable: 5.0 m
- Plug-and-play solution: easy to install by a qualified electrician or an installation service.
- Supports all electric and hybrid vehicles that are equipped with the type 2 charging socket.
You can have the Heidelberg Wallbox Energy Control 11kW funded by the KFW. The following criteria must be met for funding for private charging points: A subsidy of € 900.00 is permitted for each charging point if the total costs (item...
€901.00
€757.14 excl. MwSt Prices incl. VAT plus shipping costs
Heidelberg Wallbox Energy Control 11kW 5m/ 7,5m (eligible for funding from KFW) ![Heidelberg Wallbox Energy Control 11kW 5m/ 7,5m (eligible for funding from KFW)]( "Heidelberg Wallbox Energy Control 11kW 5m/ 7,5m (eligible for funding from KFW)")
Licensed and approved for Germany only.
- Connection to 230 volts (single-phase) or 400 volts (three-phase)
- Integrated residual current detection: DC 6mA
- Cable length: 3.5m
- Charging capacity (adjustable): e.g. 2.1 kW/3.7kW/7.2 kW/11kW
- Plug-and-play solution: easy installation by electrician or installation service
- supports all electric and hybrid vehicles equipped with the type 2 charging socket
The Heidelberg Wallbox Energy Control 11 kW is the first wallbox from Heidelberg that offers local and dynamic load management. The charging current can be distributed to up to 16 wallboxes, so up to 16 hybrid or e-cars can be charged at...
€795.96
€668.87 excl. MwSt Prices incl. VAT plus shipping costs
Heidelberg Wallbox Home Eco 11 kW plus steel column ![Heidelberg Wallbox Home Eco 11 kW plus steel column]( "Heidelberg Wallbox Home Eco 11 kW plus steel column")
Licensed and approved for Germany only.
- Connection to 230 volts (single-phase) or 400 volts (three-phase)
- Integrated residual current detection: DC 6mA
- Cable length: 3.5m
- Charging capacity (adjustable): e.g. 2.1 kW/3.7kW/7.2 kW/11kW
- Plug-and-play solution: easy installation by electrician or installation service
- supports all electric and hybrid vehicles equipped with the type 2 charging socket
- Material of the column: V2A stainless steel
- Dimensions of the column: 1370 (h) x 250 (w) x 180 (d) in millimeters
- Weight of the column: 11.5 kg
- Color of the column: Matt stainless steel
- Universal column – compatible with all Heidelberg Wallboxes
- Easy and safe installation
The Wallbox impresses with its easy and comfortable handling. The high performance charging system guarantees a fast charging of your electric vehicle. A safe and intelligent socket with an elegant design for your electric car. No fear...
€834.92
€701.61 excl. MwSt Prices incl. VAT plus shipping costs
Heidelberg Wallbox stainless steel column ![Heidelberg Wallbox stainless steel column]( "Heidelberg Wallbox stainless steel column")
- Material: V2A stainless steel
- Dimensions:: 1370 (h) x 250 (w) x 180 (d) in millimeters
- Weight: 11.5 kg
- Color: Matt stainless steel
- Universal column – compatible with all Heidelberg Wallboxes
- Easy and safe installation
If there is no possibility for wall mounting, the wallbox column made of ground, matt stainless steel offers an alternative. It impresses with its simple installation and is suitable for both indoor and outdoor use. The universal column...
€399.92
€336.07 excl. MwSt Prices incl. VAT plus shipping costs